DUAL HEPA FILTRATION

The 550 dual Hepa filtration systems is EPA RRP compliant when working with hazardous materials. The first stage of filtration uses our easy to replace twist on H-13 Hepa filters, capable of capturing 98.97% of dust particles .3 micron in size. These filters are continually pulsed clean during operation, preventing them from ever facing with debris and clogging.

 Pulse cleaning the filters STOPS dust and debris from facing the filters and migrating through them, this

pro-longs the life of the filters and increases filtration capacity. Once dust has migrated through a filter, dust

will pass through the vacuum destroying the motor over

time and exhausting dust into the air. Pulse cleaning

stops this migration, allowing the filters to last upwards

of a year or longer without needing to be changed, cutting filter replacement cost dramatically. Our exclusive Pulse cleaning technology takes the strain of constant vacuum pressure off the filters and extends the life of the filter media.

Stage two of filtration uses a Hepa Certified filter that is tested, serialized and certified to eliminate 99.99% of dust particles .3 micron in size as required by EPA and OSHA regulations.  Stage two Hepa filter is a exhaust filter and is never pulsed clean. The first stage twist on filters captures most if not all dust and debris, allowing the Hepa certified filter to go mostly unused, which in returns cuts filter replacement cost. On average you will replace the Hepa

H-13 filters once every 6 to 9 months and the Hepa certified filter once a year.

 Unlike competitors inefficient shop vacuums that require the Hepa filters to be replaced after collecting 40lbs of dust, along with bags and pre filters costing hundreds of dollars a year in filter replacement, Pulse-Bac pulsing technology lowers your operating and maintenance cost while increasing your productivity and overall jobsite air quality. Over time this vacuums pays for itself!

Request Literature

Pulse-Bac® Automatic Self-Cleaning Vacuum Control Technology is the first major innovation in vacuum filtration systems in over 80 years. This revolutionary design in vacuum filtration automatically flushes the filters clear, using only ambient air and vacuum.  No blowers, shakers, compressors or buttons to push. Just turn it on and go to work the patented technology does the rest, stopping the filters from facing with dust or debris and clogging during operation.

The PB-550 can be used for general jobsite clean up but is designed to collect, capture and control dust and debris generated by hand held power tools used to cut, grind or sand. This lightweight portable industrial grade shop vacuum has a vacuum motor capable of generating over 140 cubic feet per minute of air flow, with 87” of lift and can maintain lift and suction without loss while the vacuum is in use.

  Standard vacuums begin to lose CFM (air flow) and Lift (suction) within the first 10-15 minutes of use due to the filter facing with dust or debris. A continual decline in filtration efficiency will occur until such time the filters are cleaned or changed. Pulse-Bac® Technology solves this problem by continually cleaning the vacuums filters during operation, allowing the vacuum to continually operate at maximum efficiency.

STATS      

Benefits

• Powered by Pulse-Bac® Automatic Self-Cleaning Vacuum Control Technology.

• CDM™ Equipped - Cyclonic Debris Management System reduces filter exposure to debris.

• Two Twist on/off Hepa Rated H-13 P.T.F.E. Coated Spun Bond Polyester filters, that lasts 10x longer than conventional filters, and one industrial rated Hepa IEST RP-CC001.4 Filter that captures dust particles to .3 micron.

• A vacuum motor capable of generating 140 CFM with 87 inches of lift.

• 15' x 1.5" self locking crush proof vacuum hose.

• One year limited warranty.     

• Filtration fractional efficiency.                       

Pulse-Bac® Technology Eliminates "Hidden Cost"

Operating on any standard 110 volt outlet, the PB-550 is designed and manufactured to U.L. specifications and is backed up by a one year limited warranty. Weighing less than 30 lbs and capable of holding up to 8 gallons of dust, the PB-550 can easily be moved from work truck to jobsite and back again. The easy to use pull handle allows you to tip the PB-550 backwards and pull it across any terrain, and when not being moved sits securely in place.

 PB-1150  PB-1250  PB-2050  PB-2150  PB-2500 Tank Options  Newsletter Vacuum Accessories  Filters Contact Us