Request Literature

The PB-565 advanced filter filtration system uses a dual stage Hepa filtration process that puts you in compliance with the new 2010 EPA RRP Rules when working with hazardous materials like Lead Paint, Asbestos and Concrete.

The first stage of filtration uses our easy to install twist on H-13 rated Hepa filters. The 2^nd stage filtration uses a pre-installed Hepa certified IEST RP-CC001.4 filter that has undergone testing then serialized, labeled and certified to eliminate 99.97% of dust particles @.3 micron at a CFM flow rate of 140.

The PB-565 will not only keep you in compliance with new E.P.A. mandates when working with hazardous materials, but the patented Pulse-Bac technology will decrease your Hepa filter replacement cost and allow you to work until the job is done, without ever stopping to unclog or maintenance filters.

Vacuum Performance Over Time

CDCLarue dust removal performance stays

constant over time unlike other manufacturers

After three hours of collecting dust and debris from a High RPM 7" Hum-B edge grinder, grinding a concrete floor, the PB-1050 experienced no loss of C.F.M. and maintained sealed lift. Our exclusive Pulse-Bac Technology maintained 139 CFM from start to finish with 85" of sealed lift; as measured from the end of a 25' vacuum hose.

Pulse-Bac® tanks are not only built to last, but built to perform! The powder coated 16 gauge tank has five three inch non-marking casters capable of supporting up to 300 lbs, three handles to assist in dumping and our exclusive Cyclonic Debris Management System, The CDM™ system reduces filter exposure to debris, delivering increased productivity, longer filter life and lower maintenance cost. 

For extra storage capacity check

out our line of Extenders & Pre Separators.

No one has time for dust collection systems that clog or require filters to be cleaned. That's why you need a dust vacuum powered by Pulse-Bac Technology. This patented technology has been proven to maximize uptime and more importantly - profits!

The PB-565 can take on the dirtiest environments without ever clogging the filters. Equipped with our patented Pulse-Bac® Automatic Self-Cleaning Vacuum Control Technology, the PB-565 automatically flushes filters clear of dust and debris during operation using only ambient air and vacuum, no blowers, shakers, compressors, or buttons to push. Just turn it on and go to work, the vacuum does the rest.

Increase productivity and lower your operating cost with

the best performing dust collection equipment in the world, Pulse-Bac!

Pulse-Bac® Technology Eliminates "Hidden Cost"

• Powered by Pulse-Bac® Automatic Self-Cleaning Vacuum Control Technology.

• CDM™ Equipped - Cyclonic Debris Management  System reduces filter exposure to debris.

• Three Twist on/off Hepa Rated H-13 P.T.F.E. Coated Spun Bond Polyester filters, that lasts 10x longer than conventional filters, and one industrial rated Hepa IEST RP-CC001.4 Filter that captures dust particles to .3 micron.

• Sturdy wide-stance dolly for easy, yet stable maneuverability.

• All metal parts are galvanized or powder coated to withstand even the harshest environments.

• One year limited warranty.

• TCS™  -The industry's first Tank Capacity Sensor is optional on all Series-1000 models. Provides both visual and audible warnings when the collection chamber reaches capacity.     

Tank Capacity Sensor

  CDCLarue  is the first in the industry to offer TCS™ Equipment, TCS is an optional tank sensor that is located inside the vacuum tank. This sensor warns the user via audible alarm and a flashing LED when debris inside the collection tank has reached a pre-determined amount. If the user fails to discard the dust or debris in a timely manner, the sensor will automatically shut off the vacuum, preventing the tank from being over filled.

Testimonials. Read what others are saying!

 PB-1150  PB-1250  PB-2050  PB-2150  PB-2500 Tank Options  Newsletter Vacuum Accessories  Filters Contact Us