The Pulse-Bac 2150 is ideal for vacuuming up fine powders like powder coat, concrete, wood, asbestos, fiberglass, drywall and any other non-combustible dry material. Our patented filtration system is able to maintain lift and suction from start to finish. Unlike today's standard vacuums that begin to loose suction once the filter becomes faced with debris, CDCLarue Pulse-Bac vacuums  automatically and continually flushes dust and debris off the filter while you work, preventing them from ever becoming faced with debris and clogging.

 

  This exclusive technology allows air to move continually through the vacuum thereby preventing the loss of lift and CFM. This profound design increases productivity, maximizes uptime, lowers maintenance cost, and increases filter life by 10 fold.

 

  Pulse-Bac Technology works by flushing the filters clear every 15 seconds using only ambient air and vacuum, no blowers, compressors, shakers or buttons to push. Just turn it on and automatically the vacuum does the rest. Guaranteed!

 

Testimonials. Read what others are saying!

 

The PB-2150 can take on the dirtiest environments without ever clogging the filters. Equipped with our patented Pulse-Bac® filtration technology, the PB-2150 can vacuum dust and debris from the finest powders. Our automatic non-clogging filtration system is ideal for capturing dust generated by surface preparation equipment and tools, manufacturing machinery, or your need!

 

  • Powered by Pulse-Bac® Automatic Self-Cleaning Vacuum Control Technology.

  • CDM™ Equipped - Cyclonic Debris Management  System reduces filter exposure to debris.

  • Durable P.T.F.E. Coated Spun Bond Polyester filters capture dust particles to .3 micron and last 10x longer than conventional filters and are Hepa H-13 Rated.

  • TCS™ Equipped -The industry's first Tank Capacity Sensor comes standard on all Series-2000 models. Provides both visual and audible warnings when the collection chamber reaches capacity.

  • All metal parts are galvanized or powder coated to withstand even the harshest environments.

  • One year limited warranty.    

  • Continuous duty. Capable of collecting debris in a 6 mil. bag or a 8gl. tank, without ever stopping production to empty or discard debris.

Request Literature

 

 

 

  Never Stop Production to Empty Dust

 

Dust Removal Performance Over Time

CDCLarue dust removal performance stays

constant over time unlike other manufacturers

While other vacuum equipment looses lift and C.F.M. during use, Pulse-Bac® vacuums do not. In independent test conducted by an outside 3rd party, CDCLarue dust vacuums maintain both lift and C.F.M. from start to finish with no change, no other vacuum equipment tested was able to do the same. No shakers to stop and shake, no compressors blowing back dust and shutting off the vacuum, with Pulse-Bac Technology we only use ambient air and vacuum to internally flush filters clear. The only vacuum that delivers non-stop vacuum power.

 

PB-2150 Specifications

Model

PB-2150

Air Watts

833

Filters (5 ea.)

Hepa H-13 Rated

Voltage

220 V AC 50/60 Hz

Single Phase

Filtration System

Self-Cleaning

Current

7.9 Amps

Sealed Lift

70"

Dimensions

63" x 29" x 45"

Motor CFM

311 (OEM rating)

Weight

222lbs

Decibel Level @ 2ft

86

Tank

8 Gallons

Inlet Size (inches)

3"

Caster

4ea. Two 3" & Two 5" non-marking.

 

        Tank Capacity Sensor

 

The PB-2000 Series offers two options for collecting and discarding dust and debris, an 8 gallon steel tank or a 6 mil. plastic bag. No matter what method you choose, you will enjoy the fact with either design, you can dump the dust and debris with out ever turning off the vacuum or stopping production.

 When the TCS™ system notifies you via audible alarm that the tank is full, just pull the tank handle and dump the debris into the tank or bag, push the dump handle back in place, remove tank or bag, and replace with new bag or empty tank. Dust and debris have never been so easy to discard, and you never stopped production.

 

Pulse-Bac, Perfect for your job!

 

CDCLarue  is the first in the industry to offer TCS™ Equipment, standard on all PB-2000 Series, TCS is a tank sensor located inside the upper collection chamber. This sensor warns the user via audible alarm and a flashing LED when debris inside the collection chamber has reached a pre-determined amount. If the user fails to discard the dust or debris in a timely manner, the sensor will automatically shut off the vacuum, preventing the tank from being over filled.

Concrete

Powder Coat

Stone

Masonry

Drywall

Epoxy coatings

Terrazzo

Mastic glues

Fiberglass

Metals

Plastics

Wood

 PB-1050 PB-1150 PB-1250  PB-2050  PB-2500  Tank Options  Newsletter Vacuum Accessories  Filters Contact Us

   

To learn more about Pulse-Bac Vacuum & Dust Collection

equipment, give us a call at 866.954.9700.

or email info@cdclarue.com

 

 

info@cdclarue.com                    Copyright © 2004 By CDCLarue Industries                       Ph 866-954-9700