|


Request Literature
The
Pulse-Bac®
filtration system uses our easy to install twist on H-13 rated
Hepa filters.
capable of eliminating 98.97% of dust particles @.3 micron at a CFM flow
rate of 170. The H-13
Hepa filters are capable of capturing
98.97% of dust particles .3 micron in size. These
filters are
continually pulsed clean during operation, preventing them from
ever facing with debris and clogging.
Pulse cleaning the filters STOPS dust and debris from
facing the filters and migrating through them,
this
pro-longs the life of the filters and increases filtration
capacity. Once dust has migrated through a filter, dust
will pass through the vacuum destroying
the motor over
time and exhausting dust into the
air. Pulse
cleaning
stops this migration, allowing the filters to last
upwards
of a year or longer without needing to be changed,
cutting filter replacement cost dramatically. Our exclusive Pulse cleaning
technology
takes the strain of constant vacuum pressure off the filters and
extends the life of the filter media.


The
PB-1050 vacuum head can be purchased with one of three tank
options, the universal bagging cart, allowing you to bag
the dust and debris with out ever stopping production.
Option # 2, A 20 gal tank with a wide stance
dolly and option # 3, our extender 55/40
which allows the vacuum head to sit on top of a 55 or 40
gallon drum, letting the drum become the holding tank for
dust and debris.
Pulse-Bac® collection tanks are not only built
to last but built to perform! The powder coated 16 gauge tanks
use three
& 5 inch non-marking casters capable of supporting up to 300 lbs,
handles to assist in dumping and have our exclusive
Cyclonic
Debris Management System,
The CDM™
system reduces filter exposure to debris while delivering increased productivity, longer filter life and
lower maintenance cost.
For extra storage capacity check
out our line of
Extenders & Pre Separators.
|
Who has
time for vacuums or dust collection
systems that clog or
require filters to be continually cleaned or replaced? That's why you need a vacuum
system powered by Pulse-Bac® Automatic Self- Cleaning Vacuum
Control Technology. This patented technology has been proven to
maximize productivity, lower cost and maintain EPA
permissible exposure limits for
indefinite periods of use. No other vacuum can do that!

Increase productivity and lower
your operating cost with the best performing vacuum and dust
collection equipment in the world, Pulse-Bac!
The
PB-1050 can take on the dirtiest environments without ever
clogging the filters. Equipped with our patented Pulse-Bac®
Automatic Self-Cleaning Vacuum Control Technology, the PB-1050 automatically flushes filters clear of dust and debris during
operation using only ambient air and vacuum, no blowers,
shakers, compressors, or buttons to push. Just turn it on and go
to work, the vacuum does the rest.
Pulse-Bac®
Technology Eliminates "Hidden Cost"
Tank
Capacity Sensor
CDCLarue is the first in the industry
to offer TCS™ Equipment, TCS is an optional
tank sensor that is located inside the vacuum tank. This sensor warns the
user via audible alarm and a flashing LED when debris inside
the collection tank has
reached a pre-determined amount. If the user
fails to discard the dust or debris in a timely manner, the
sensor will automatically shut off the vacuum,
preventing the tank from being over filled.
|
PB-1050
Specifications ** Available in 220 Volt |
|
Model
Spec |
PB-1050 |
Air Watts |
454 |
|
Filters (3 ea.) |
Hepa H-13 Rated |
Voltage |
120 V AC 50/60 Hz |
|
Filtration System |
Self-Cleaning |
Current |
12.1 Amps |
|
Decibel @ 2ft. |
82 |
Dimensions |
23" x 39" x 21" |
|
Tank |
16 Gallons |
Weight |
79lbs |
|
Inlet Size (inches) |
2" |
Caster |
5ea 3" non-marking |
Testimonials.
Read what others are saying!
|
|
|
Unlike standard vacuum equipment that begins
to loose
suction within the first 15 minutes of use, Pulse-Bac®
vacuums maintain suction from start to finish,
keeping
you in compliance with EPA
permissible exposure limits.

|
|