Customer Testimonials

I  purchased both your Hum-B and Pulse-Bac from my epoxy distributor in Iowa and they performed outstanding! I had to prep 825 sq. feet  of concrete that had carpet glue and linoleum mastic. I used a "zec"type blade to remove the mastic, but then went back over with the 12 segment diamond blade and ground the floor to a perfect profile. I found that I could maneuver the Hum-B with one hand effortlessly. What would have took me 10 hours on my hands and knees, only took me 4, and my back didn't hurt. I did not have any gauges on the floor, and was able to come within a 1/4 inch of the wall so no "touch up" grinding was required. If any contractor is serious about surface prep and applying epoxy finishes, then they need to purchase the Hum-B and Pulse-Bac. I had a virtually dustless work area, and I know my customer appreciated that as well. The Hum-B and Pulse-Bac are the real deal! 

 

 

Chris Rath

Concrete Ideas,

Baraboo, WI.

 

 

 

I just read your news letter and thought I would send you a "Hello". Well it's been almost a year and half since I purchased my "big red" vacuum. Most days it runs from 6 to 8 hours a day. Aside from a stupid error on my part (a generator that had an attitude) where I blew my circuit board, she runs beautifully. I have been on a few jobs with my friends and they have that "Blue" machine, its fun to watch them have to stop every 10 to 15 minutes to shake the handle to clean the filters. At the end of the day I just empty the "red" and I'm ready for tomorrow. Thanks for a great product but most of all thank you for all the tech support, any time I've had any questions you have always been there to help.

 

 

Marty Meewis

COLORS ON CONCRETE

CONCRETE DOESN'T HAVE TO BE GRAY!

 

 

 

 

 

I just wanted to let you know how pleased we are with the Pulse-Bac®.  We have owned other well known brands that cost more and nothing has out-performed the Pulse-Bac.  This vacuum is the most dependable piece of equipment that we have and the ease of use is second to none.  I would highly recommend this vacuum to everyone.

 

 

 

Thanks again!

Joe Tinker

Garage Innovations of Kansas

 

 

 

Hi Jeff!  I had talked  briefly with you about the Pulse-Bac® vacuums at the World of Concrete trade show.  I Just wanted to let you know that we run three of them and think they are the best vacuum for concrete grinding and polishing.  We have tried two other vacuum systems on the market and nothing performs like yours.  No blown circuits and no plugged filters to deal with, plug them in and forget about them.  Wonderful!

 

Thanks again,

Clint Buswell

Creative Concrete Solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hi Beth,


I wanted to let you know that in about 2 weeks, my company performed enough floor prep to completely pay off a "Hum-B Edge Grinder," and a "PB-1250 Industrial Vacuum."  For those of you who might read this, I paid $5000.00 for this equipment.  In my case, it only took 2 weeks for this equipment to pay for itself!  I can't begin to express how glad I am to have made the decision to buy.  From a business owner and a homeowner point of view, this sure takes worry about the "dust condition" factor.  I was personally at the jobsite every single day, and watched this equipment perform flawlessly.
 

Regards

Jack King

Arizona Home Floors

 

For our Customers and new ones to come:

01-07-10

 

Since the introduction of the new 1000 Series of Pulse-Bac®

dust vacuums back in December 2008, CDCLarue to date has had no out of the box failures, and in the course of the one year warranty, CDCLarue under this warranty has only replaced one vacuum motor due to the workmanship of the manufacturer. CDCLarue equipment is used in the harshest conditions out there, our vacuum equipment captures dust from floor grinders, sucks up fine powders like powder coat, and are moved around more than an Algerian leaving Yemen. Here at CDCLarue we strive for excellence, and back up what we sell! We now our equipment is an investment in your company and in the well being of your employees, we never forget that! We know you have choices, and we believe in the free market capitalism that makes that choice available, and we want to be your choice. Thank you for a good 2009, as hard as it was we are still growing and moving forward thanks to all of our customers, big and small. We will not forget that.

 

Thank you for your business.

Management

CDCLarue Industries, Inc.  

 

 

 

 

 

 

To learn more about CDCLarue equipment and accessories,

 give us a call at 866.954.9700

 

 

 

 

info@cdclarue.com                    Copyright © 2004 By CDCLarue Industries                       Ph 866-954-9700

9384 Ridgeview St. Tulsa, OK 74131